Key To Symbols; Symbols; Contents - Jonsered GC2236 Operator's Manual

Symbols

WARNING! Clearing saws, brushcutters
and trimmers can be dangerous! Careless
or incorrect use can result in serious or
fatal injury to the operator or others. It is
extremely important that you read and
understand the contents of the operator's
manual.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• A protective helmet where there is a risk
of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and
ricochets.
The operator of the machine must ensure,
while working, that no persons or animals
come closer than 15 metres.
Machines fitted with saw blades or grass
blades can be thrown violently to the side
when the blade comes into contact with a
fixed object. This is called blade thrust. The
blade is capable of amputating an arm or
leg. Always keep people and animals at
least 15 metres from the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with
trimmer cord.
2 –
English

KEY TO SYMBOLS

Starting instructions
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
The engine is switched off by moving the
stop switch to the stop position. CAUTION!
The stop switch automatically returns to the
start position. In order to prevent
unintentional starting, the spark plug cap
must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always be
used.
1.
2.
3.
4.