Technical Data Technical Data - Jonsered GC2236 Operator's Manual
Epa
Hide thumbs
Also See for GC2236:
- Operator's manual (36 pages) ,
- Operator's manual (34 pages) ,
- Operator's manual (36 pages)
Table of Contents
Advertisement
Technical data
Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 13,0/5,9
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-2003, dB(A), min/
max:
Vibration levels
Vibration levels at handles, measured according to
2
ANSI B175.3-2003, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
Approved accessories
Centre hole in blades/cutters, Ø 25,4 mm
Output shaft thread M12
Grass blade/grass cutter
Plastic blades
Trimmer head
Support cup
TECHNICAL DATA
GC 2236
3
2,11/34,6
1,50/38,0
1,20/30,5
2900
11500
8920
1,6/8400
No
Yes
Walbro MB
Champion RCJ 6Y
0,02/0,5
Zama C1Q
1,27/0,6
97/98
1,3/1,0
1,8/1,4
3,5/5,2
4,8/6,2
Type
Multi 255-3 (Ø 255 3 teeth)
Grass 255-4 (Ø 255 4 teeth)
Multi 275-4 (Ø 275 4 teeth)
Multi 300-3 (Ø 300 3 teeth)
Polytrim Ø 300
Tap-N-Go 35
S35
Tap-N-Go 45
503 89 01-02
Cutting attachment guard, Art. no.
537 33 16-04
537 33 16-04
537 33 16-04
537 33 16-04
537 33 16-04
537 33 16-04
537 33 16-04
537 33 16-04
-
– 25
English
Advertisement
Table of Contents
