Symbols On The Mac Hine And/Or In The Manual; Key To Symbols - Jonsered GT 2228 Operator's Manual

Symbols on the mac hine and/or in
the manual:
W ARNING! Clearing saws,
brushcutters and trimmers can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others. It is extremely
important that you read and
understand the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
A protective helmet where there is a
risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
5 0 feet ( 15 meters) .
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Only use non-metallic, exible
cutting attachments, i.e. trimmer
heads with trimmer line.
Assist handle to be positioned
only between the arrows.
KEY T O SYMBOLS
Other symbols/decals on the mac hine refer to special
certication requirements for certain markets.
The engine is s witched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
10000
The engine exhaust from this product
contains chemicals known to the State
2
of California to cause cancer, birth
defects or other reproductive harm.