Verizon 4G LTE User Manual page 22

The following screen appears:
3. Change the Internet Connection Mode to Use Ethernet connection first and if fails
use Mobile Broadband connection.
The Failover Detection Method buttons become available.
4. Select the failover detection method that determines if a failover occurs from the WAN
Ethernet broadband connection to the 4G LTE broadband connection:
• DNS lookup using WAN DNS Server. A failover occurs if the router can no longer
reach the default WAN DNS server over the Ethernet connection.
• DNS lookup by a hostname. A failover occurs if the router can no longer reach a
specific host name over the Ethernet connection.
Enter the host name.
• Ping this IP address. A failover occurs if the router can no longer ping a specific IP
address over the Ethernet connection.
Enter the IP address to which the ping is sent.
5. Configure the retry period and number of retry attempts before a failover occurs:
• Retry Interval is. Enter the interval in seconds after which the router attempts to
detect if the WAN Ethernet broadband connection is still up. The default is
30 seconds.
• Failover after. Enter the number of times that the router can detect that the WAN
Ethernet broadband connection is down before the router fails over. The default is
4 times.
Verizon 4G LTE Broadband Router
Setting Up Your Router
21