ASSEMBLY AND ADJUSTMENT OF ENGINE
AUTOLUBRICATION PUMP
1. Install:
• Elastic circlip
• Pin
• Pump drive gear
• Elastic circlip
2. Apply:
• Grease with lithium soap base
(on the o-ring
3. Install:
• Autolubrication pump
Screw (autolubrication pump)
0.4 m • kg
4. Apply:
• Grease with lithium soap base
(on the autolubrication pump gear
15 cc
FLYWHEEL MAGNETO
1. Install:
• Seal
2. Apply:
• Grease with lithium soap base
(on the oil reten
3. Pass the wheel cable through the crankca-
se
orifice.
4. Install:
• Stator assembly
Screw (stator assembly)
0.8 m • kg
5. Install:
• Key
• Magnetic wheel
• Flat washer
• Nut
4-24
MOT
)
)
,
)