Inspection - Yamaha YB50 Service Manual

FRONT FORK
4. Remove:
• Bolt (shock absorber rod)
• Copper washer
NOTE:
Remove the bolt (shock absorber rod) while
the shock absorber rod is held with the T-
handle and a support
T-handle:
90890-01326
Support:
90890-01294-A
5. Remove:
• Inner pipe
• Shock absorber rod
• Oil lock piece (left side)
• Oil seal

INSPECTION

1. Inspect:
• Fork bar
• Outer tube
• Shock absorber rod
Striping/Warping/Wear/Damage
Change
s WARNING
s
Do not try to straighten a fork bar or an
outer tube as this may dangerously wea-
ken the tube.
2. Measure:
• Fork spring
Above specified limit
Free length of fork spring (limit)
Left 226 mm
Right 226 mm
3. Inspect:
• Oil lock piece
• O-ring (cover)
Wear/Damage
6-15
CHAS
Change
Change
: