Table of Contents
Advertisement
Electrical Requirements
Cutting Wheel Speed
Spindle Size
Blade Diameter
Maximum Vise Opening
Maximum Cut
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
read the entire iMportant safetY inforMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
warning
note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
1.
If a Cutting Wheel has already been in use, wait
until it has time to air cool before beginning this
procedure.
2.
Wearing eye protection and work gloves, unhook
the Chain (70) from the Hook (50). Move the
assembly upwards and rotate the Adjustable
Safety Guard (22) out of the way. The top edge
of the Adjustable Safety Guard should overlap the
lower front edge of the Wheel Guard.
3.
Push the Lock Pin (62) in and manually rotate the
Cutting Wheel, until the Lock Pin fully engages
and holds the Cutting Wheel in place. Continue
to hold the Lock Pin down.
SKU 96971
for technical questions, please call 1-800-444-3353.
specifications
unpacKing
set up instructions
risk of accidental starting; resulting in serious personal
injury. turn the power switch of the tool to the "off"
position and unplug the tool from the electrical outlet before
assembling or making any adjustments to the tool.
installing the cutting wheel
120 V~ / 60 Hz / 15A
3,900 RPM
1"
14"
6-5/8"
4" Metal @ 90°
lock pin
(62)
cutting
wheel (4)
REV 10a
Page 10
Advertisement
Table of Contents
