Log Data Setup; Lots - Hanna Instruments HI 9828 Instruction Manual

Notes Notes
Notes Notes Notes A logging list complete with remarks and locations (model with GPS
only), can be created before taking any measurement and logging. See
below paragraph "Log data setup". Press ESC to return to the previous
screen or keep it pressed to abort the logging procedure completely.
In case of continuous logging, the data collection will start after the last
option is confirmed. For one sample logging, the data are stored after
<Log> is pressed.

6.2 LOG DATA SETUP

To set lots, insert remarks, review logged or plot-
ted data and to delete lots, from the main menu
select the "Log data" option and press <OK> to
confirm. A list of available functions appears.

6.2.1 Lots

This option allows to insert a new lot, view logged
measurements, plot data or delete lots.
• Use the arrow keys to select the desired lot and
then press <OK>.
• To create a new lot press the <New lot> softkey
and use the keyboard to insert the identifica-
tion name. Press <OK> to confirm.
Note Note Note The screen top line shows the remain-
Note Note
ing memory percentage available for in-
serting new data, for example "Data lots
(free: 100%)".
• After <OK> is pressed, the meter displays all
data related to the selected lot: number of
samples, memory space used, time and date of
the first and the last readings.
• If <Options> is pressed, the following functions
can be performed: "View" the readings stored in
the selected lot; "Plot" the corresponding graph;
"Delete" the selected lot.
Note Note
Note Note Note The screen top line indicates the lot
name.
View
• Confirm the "View" option and the sample de-
tails will be displayed.
45