Hanna Instruments HI 9828 Instruction Manual page 24

GPS unit power save (only for model with GPS)
This item allows to save battery life by automatically switching off the GPS unit,
while the meter is in continuous logging mode with a logging interval of at least
4 minutes. The GPS unit will turn off after each measurement and turn on again
3 minutes before the next measurement has to be taken.
If for some reason the GPS unit can not acquire satellites within two minutes,
disabled this feature by pressing <Modify>.
Password
To enable the password proceed as follows:
• Highlight the "Password" setup item and press <Modify>.
• Insert the desired password in the text box and press <OK>.
Note Note
Note Note Note While typing, the characters are masked with "*" (star) symbol.
• The meter will ask to confirm. Type again the same password and then press
<OK> to confirm.
• The meter returns to the "System Setup" menu. The checkbox corresponding to
the password item is checked.
To disable the password, highlight the "Password" setup item and press <Modify>,
insert the password and then press <Disable>. "NO" appears in the text box.
Press <OK> to confirm.
ID
The meter can be labelled with an identification
code: press <Modify> and a text box will be
displayed. Use the keyboard to insert the desired
alphanumeric code and then press <OK>. A
maximum of 25 characters can be used.
Language
The display language can be selected among
the following available options: English, Span-
ish, French, Portuguese and Italian. Press the
<Modify> softkey to set the desired option.
26