Chemical Formula & Unit Conversion; Logging Data & Log Recall - Hanna Instruments HI97105 Instruction Manual

11
5.2. CHEMICAL FORMULA & UNIT CONVERSION
Chemical formula and unit conversion factors are method‑dependent and pre‑programmed into the instrument.
Note: When powered on, the instrument starts with the previously selected chemical form.
To view the displayed result in the desired chemical formula:
1. Press the key to enter the menu.
2. Use the functional keys to select Chemical Form (if available for selected method)
3. Press Select to change the displayed chemical formula.
4. Use functional keys to highlight desired chemical formula. Press Select.
5.3. LOGGING DATA & LOG RECALL
The instrument features a data autolog function to help users keep track of all
measurements. Every time a measurement is made the data is automatically
saved. The data log can hold 200 individual measurements.
Note: When the data log is full (200 data points), the meter will rewrite the oldest
data point. A confirmation message will display before a log is overwritten.
Viewing and deleting the data is possible using the Log Recall menu.
key to enter the menu. Use the functional keys to select Log Recall and press Select.
1. Press the
2. Use the functional keys to highlight a log and press Info to view additional information about the log.
From this screen Next and Previous can be used to view other logs.
3. Press Delete to erase logged data. After pressing Delete a prompt on
display will ask for confirmation.
General Operations