When Placing The Speakers On A Table; Place The Speakers Using The Stands; Place The Speakers Using - Panasonic SC-HTB20 Owner's Manual





Fit the speaker(s) securely onto the screw(s) with the hole(s).
≥ Place the speaker that is connected with the speaker cable with a red connector on the observers' right, and connect with
the speaker cable with a white connector on the observers' left.

When placing the speakers on a table

∏ 1 Speaker (L)
∏ 1 Speaker joint
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 to 3 of "Place the speakers
horizontally" (
Attach the stands.
≥ Keep the screws out of reach of children to prevent swallowing.
A At least 30 mm (1
B ‰4.0 mm ( /
5
C ‰7.0 mm to ‰9.4 mm

( / q to /
9 3 q)
32 8
D Wall or pillar
E 5.5 mm to 6.5 mm
( / q to /
7 1 q)
32 4
Place the speakers using the
stands
∏ 1 Speaker (R)
∏ 2 Stands
10).
/
3 q)
16
q)
32

 
DO
≥ Move the speaker so
that the screw is in
this position.
F 46.5 mm (1
G 24.5 mm (
31
DO NOT
≥ In this position, the
speaker will likely fall if
moved to the left or
right.
∏ 2 Speaker cables
(L): WHITE
(R): RED
∏ 6 Screws
(Continued on the next page)
/
53 q)
64
/
q)
32
13
VQT4D53