Panasonic SC-HTB20 Owner's Manual page 11
Hide thumbs
Also See for SC-HTB20:
- Quick start manual (2 pages) ,
- Quick start manual (2 pages) ,
- Operating instructions manual (32 pages)
Table of Contents
Advertisement
Connect the speaker cables.
≥ To make sure that the speaker cable is connected to the correct speaker, match the color of the speaker connector with the
color of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong speaker.
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Drive a screw (not supplied) into the wall.
≥ Use the measurements indicated below to identify the screwing positions on the wall.
≥ Leave at least 20 mm (
/
25
≥ The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 33 kg
(72.8 lbs).
≥ Keep the screws out of reach of children to prevent swallowing.
Front view (semi-transparent image)
F 190.5 mm (7
/
q)
1
2
J 12.5 mm (
/
1
q)
2
Fit the speaker securely onto the screw(s) with the hole(s).
q) of space above and on each side of the speaker to allow enough space for fitting the speaker.
32
G 187 mm (7
/
q)
23
64
K Wall mounting hole
DO
≥ Move the speaker so
that the screw is in
this position.
Push
A At least 30 mm (1
B ‰4.0 mm (
C ‰7.0 mm to ‰9.4 mm (
D Wall or pillar
E 5.5 mm to 6.5 mm (
H 177 mm (6
/
q)
31
32
DO NOT
1 Insert the wire fully.
r: White
s: Blue line
2 Press into the
groove.
/
3
q)
16
/
5
q)
32
/
q to
/
9
3
q)
32
8
/
q to
/
7
1
q)
32
4
I 200.5 mm (7
/
57
64
≥ In this position, the
speaker will likely fall
if moved to the left or
right.
q)
11
VQT4D53
Hide quick links:
Advertisement
Table of Contents
