Table of Contents
Advertisement
E. Notice of Radiated Emissions
This model complies with rules regarding radiation and radio frequency emission as defined by
local regulatory agencies. In accordance with these agencies, you may be required to provide
information such as the following to the end user.
F. Pictures
The pictures in this manual are for illustrative purposes only; your actual hardware may look
slightly different.
G. Interference and Attenuation
Phone may interfere with sensitive laboratory equipment, medical equipment, etc.Interference
from unsuppressed engines or electric motors may cause problems.
H. Electrostatic Sensitive Devices
Boards, which contain Electrostatic Sensitive Device (ESD), are indicated
Following information is ESD handling:
•Service personnel should ground themselves by using a wrist strap when exchange
systemboards.
•When repairs are made to a system board, they should spread thefloor with anti-static mat
which is also grounded.
•Use a suitable, grounded soldering iron.
•Keep sensitive parts in these protective packages until these are used.
•When returning system boards or parts like EEPROM to the factory, use the protective
package as described.
ATTENTION
- 3 -
1. INTRODUCTION
by the sign.
Advertisement
Table of Contents
