Preparations; Accessories; Required Items; Name Of Parts (Main Body) - Oce OP1030 Operation Manual

1. Preparations

1-1 Accessories

• CD-ROM x 2
• This Operation Guide

1-2 Required items

• When connecting the printer directly to your computer: Parallel cable (IEEE1284 compliant, 1.5 m or shorter) or USB cable (Hi-Speed USB2.0
compliant, 5.0 m or shoter)
• When connecting the printer to a network: Ethernet cable (10BASE-T or 100BASE-TX)
*When you use a USB, 10BASE-T or 100BASE-TX cable, make sure it is a shielded cable.

1-3 Name of parts (main body)

1 Memory card (CompactFlash) slot
Insert the optional Memory Card (CompactFlash) here.
Optional fonts, macros, and forms can be written into
this Memory Card. For details, refer to the Operation
Guide <Functions Edition>.
2 USB interface connector
This USB interface conforms to Hi-Speed USB2.0. Use a
USB cable to connect this connector with a USB port of
your computer.
3 Network interface connector
Use a 10BASE-T/100BASE-TX network cable to
connect the printer to a network.
4 Parallel interface connector
Use a parallel cable to connect the connector with a
parallel port of your computer.
5 Power switch
Turn this switch ON when using the printer. Turn this
switch Off when connecting the printer cable, etc.
6 Operation panel
Use when performing settings at the printer itself.
2
6
5
2
1
3
4