Fujitsu PRIMERGY RX600 S3 Options Manual page 59

RemoteView components Installing the RemoteView Service Board S2 LP
Figure 40: Connectors of the RSB S2 LP
1 Connector for the adapter cable (connector for the external power
supply and USB and VGA connection)
2 Connector for the optional power supply (not used)
3 IPMB connector
4 LAN connector
Ê Plug the supplied IPMB cable into the connector (see (3) in the above figure)
on the RSB S2 LP.
Ê Check that the IPMB cable is connected to the system board (see (A) in
figure 39 on page
I
The position of the connectors is described in the Technical Manual
for the D2352 system board.
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
U41640-J-Z156-2-76
58).
chapter "Completion" on page
Options Guide RX600 S3
69f.
59