Fujitsu PRIMERGY RX600 S3 Options Manual page 56

Installing controllers
A
Figure 38: Mounting of a non-hot-plug controller
Ê Insert the controller in the slot and press it in carefully. Then close the locking
mechanism of the slot (A).
Ê If necessary, plug in the cables on the board and other components.
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
56
chapter "Completion" on page
Options Guide RX600 S3
Controllers in non-hot-plug PCI slots
69f.
U41640-J-Z156-2-76