Delay Start Button; Permanent Extra Rinse; Drying Time Button - AEG L 75480 WD User Manual

10 www.aeg.com
D • The programme time (washing and/or drying phase)
• The delay start
• Alarm codes
• Err
•
1) Only available for Spin/Drain programme
2) They come on when you set an automatic drying programme.
3) The symbols appear on the display when the related phase or function is set.
6.4 Start/Pause button
Press button
programme.

6.5 Delay start button

Press button
programme from 30 minutes to 20 hours.
6.6 Time save button
Press the button
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.

6.7 Drying time button

Press this button to set the time that
suits the fabrics you have to dry. The dis-
play shows the set value.
Each time you press this button the time
value increases by 5 minutes.
When the programme starts, the time decreases with steps of 1 mi-
nute.
When you press the delay start button, the display shows the delay
start time.
If the appliance has a malfunction, the display shows alarm codes. Re-
fer to 'Troubleshooting' chapter.
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
When the programme is completed.
to start or interrupt a
4
5 to delay the start of a
6 to decrease the
4
6.8 Automatic dry button 8
Press this button to set an automatic lev-
5
el of dryness for the laundry. The display
shows the symbol of the set level.
• Extra dry
• Cupboard dry
• Iron dry
6

6.9 Permanent extra rinse

function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
6
7
until the indicator of button
• To deactivate the function press but-
ton
time until the indicator of button
off.
flashes.
4
You cannot set all time values for
different types of fabrics.
You can not set all automatic lev-
els for each type of fabrics.
and button 5 at the same time
6 and button 5 at the same
is on.
7
7 is