Related Manuals for AEG L 75283 FL
Summary of Contents for AEG L 75283 FL
- Page 1 L 75280 FL WASHING MACHINE USER MANUAL L 75282 FL L 75283 FL L 75286 FL L 75287 FL L 75480 FL L 75483 FL...
-
Page 2: Table Of Contents
CONTENTS 4 SAFETY INFORMATION 6 ENVIRONMENT CONCERNS 6 TECHNICAL DATA 7 PRODUCT DESCRIPTION 7 ACCESSORIES 8 CONTROL PANEL 11 PROGRAMMES 14 BEFORE FIRST USE 14 USING THE APPLIANCE 14 LOADING THE LAUNDRY 15 FILLING THE DETERGENT AND ADDITIVES 16 SETTING AND STARTING A PROGRAMME 17 AT THE END OF THE PROGRAMME 18 HINTS AND TIPS 19 CARE AND CLEANING... - Page 3 ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
-
Page 4: Safety Information
SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the ap- pliance. Always keep these instructions with the appliance also if you move or give it to GENERAL SAFETY a different person. - Page 5 ENGLISH internal components and cause leak- Electrical connection ages or malfunctions. • Make sure that the appliance is • Do not install and connect a dam- earthed. aged appliance. • Make sure that the electrical informa- • Make sure to remove all packaging tion on the rating plate agrees with and transport bolts.
-
Page 6: Environment Concerns
ENVIRONMENT CONCERNS PACKAGING MATERIALS The symbol on the product or on its packaging indicates that this product Recycle the materials with the symbol may not be treated as household waste. Instead it should be taken to the Put the packaging in applicable con- appropriate collection point for the tainers to recycle it. -
Page 7: Product Description
ENGLISH PRODUCT DESCRIPTION Worktop Feet for the appliance level Detergent dispenser Water drain hose Control panel Water inlet valve Door handle Mains cable Rating plate Transit bolts Drain pump Feet for the appliance level ACCESSORIES Spanner To remove the transit bolts. Plastic caps To close the holes on the rear side of the cabinet after the removal of... -
Page 8: Control Panel
CONTROL PANEL On/Off button (On/Off) Time saving button (Καθυστ. Εναρξης) Programme knob Extra rinse button (Επιπλ. Ξέβγαλ.) Display Stain button (Λεκέδ) Start Pause button (Εναρξη/Παύση) Spin reduction button (Στύψιμο) Delay start button (Καθυστ. Temperature button (Θερμοκρ.) Εναρξης) – Set again the washing programme ON OFF BUTTON and all possible options. - Page 9 ENGLISH • The default spin speed of the programme. • 'No Spin' and 'Rinse Hold' symbols. • The display symbols. Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off.
- Page 10 TIME SAVE BUTTON Spin phase is off. Press the button to decrease the 'Rinse Hold' function is programme duration. • Press one time to set 'Shortened du- ration' for items with daily soil. TEMPERATURE BUTTON • Press two times to set 'Extra Quick' for items with almost no soil.
-
Page 11: Programmes
ENGLISH PERMANENT EXTRA RINSE • To deactivate the function press but- and button at the same FUNCTION time until the indicator of button With this function you can keep the ex- is off. tra rinse function permanently on when you set a new programme. •... - Page 12 Programme Type of load Cycle Functions Temperature max. weight of load description Μάλλινα/ Machine washable Wash SPIN REDUCTION Μεταξωτά wool. Hand washable Rinses RINSE HOLD wool and delicate Short spin 40° - Cold fabrics with «hand washing» care sym- bol. max.
- Page 13 ENGLISH 6) Set this programme to have a good washing results and decrease the energy consumption. The time of the washing programme is extended. STEAM PROGRAMMES Type of load Max. load Programme Φρεσκάρισμα με ατμό Cotton and synthetic items. up to 1.5 Kg This cycle removes odours from Do not set the Steam pro- the laundry.
-
Page 14: Before First Use
1) Refer to the display for the programme time. 2) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type of laundry, on the temperature of the water supply and on the ambient temperature. -
Page 15: Filling The Detergent And Additives
ENGLISH FILLING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before the start of the programme. The detergent compartment for the washing phase. If you use a liquid detergent, put it immediately before you start the programme. -
Page 16: Setting And Starting A Programme
3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed in the flap. -
Page 17: At The End Of The Programme
ENGLISH CHANGE A FUNCTION 3. Press button . The programme starts. You can change only some functions before they operate. OPEN THE DOOR 1. Press button . The indicator While a programme or the delay start flashes. operates, the appliance door is locked. 2. -
Page 18: Hints And Tips
The washing programme is 2. Press the Start/Pause button completed, but there is water in the The appliance drain the water and drum: spin. – The drum turns regularly to prevent 3. When the programme is completed the creases in the laundry. and the door lock symbol goes off, you can open the door –... -
Page 19: Care And Cleaning
ENGLISH you use a water softener for washing • German degrees (°dH). machines. In areas where the water • French degrees (°TH). hardness is soft it is not necessary to • mmol/l (millimol for each litre - inter- use a water softener. national unit for the hardness of wa- To know the water hardness in your ter). - Page 20 DOOR SEAL Regularly examine the seal and remove all objects from the inner part. DETERGENT DISPENSER To clean the dispenser: 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquid additive compartment. 4. Clean all the parts with water. 5.
- Page 21 ENGLISH • The display shows an alarm code be- WARNING! cause of the problem with water 1. Disconnect the mains plug drain. from the mains socket. 2. Do not remove the filter while the appliance oper- ates. Do not clean the drain pump if the water in the ap- pliance is hot.
- Page 22 8. Make sure that the impeller of the pump can turn. If this does not oc- cur, contact the service centre. 9. Clean the filter under the water tap and put it back in the pump into the special guides. 10.
-
Page 23: Troubleshooting
ENGLISH 6. Install again the inlet hose. Make sure that the couplings are tight to prevent leakages. 7. Open the water tap. 45° 35° EMERGENCY DRAIN 0 °C, remove the remaining water from the inlet hose and the drain pump. Because of a malfunction, the appliance 1. - Page 24 Problem Possible cause Possible solution The filters in the water in- Clean the filters. Refer to 'Care let hose is blocked . and cleaning'. The water tap is blocked Clean the water tap. or is furred with lime- scale. The connection of the Make sure that the connection is water inlet hose is not correct.
- Page 25 ENGLISH Problem Possible cause Possible solution You did not press button Press button The delay start is set. To start immediately the pro- gramme, cancel the delay start. The Child Lock function Deactivate the Child Lock func- is activated. tion. There is water on Leakages from the cou- Make sure that the couplings are...
-
Page 26: Installation
INSTALLATION UNPACKING 1. Use the gloves. Remove the exter- nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the internal film. 5. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum. - Page 27 ENGLISH 6. Put the front piece on the floor be- hind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to dam- age the hoses. 7. Remove the polystyrene protection from the bottom. 8.
- Page 28 12. Replace the plastic spacers with the plastic caps. You can find these caps in the user manual bag. WARNING! We recommend that you keep Remove all the packaging and the packaging and the transit the transit bolts before you in- bolts for when you move the ap- stall the appliance.
- Page 29 ENGLISH THE INLET HOSE • Connect the hose to the appliance. Turn the inlet hose only left or right. Loose the ring nut to set it in the cor- rect position. • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaks from the couplings.
- Page 30 With the plastic hose guide. • On the edge of a sink. • Make sure that the plastic guide can- not move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration.
- Page 31 ENGLISH You can extend the drain hose to maximum 400 mm. Contact the service centre for the other drain hose and the extension.
- Page 32 132940881-A-022011...