Turning Off The Receiver With The Tv (System Power Off) - Sony HT-SF360 Operating Instructions Manual

3
Press v/V repeatedly until
"VOL LIM" appears, then press
or b.
4
Press v/V to select the
maximum volume level you
want.
The maximum volume level changes as
follows:
MAX y 39 y 38 y ...... y 2 y 1
y MIN
5
Press AMP MENU.
The AMP MENU turns off.
Notes
• This function is available only when the Control
for HDMI function is set to on.
• This function is not available when the output
method changes from the speakers connected to the
receiver to the TV speaker.
Tips
• Sony recommends that you set the maximum
volume level to a little lower than the volume you
usually listen to.
• Regardless of the maximum volume level you set,
the MASTER VOLUME on the receiver and the
MASTER VOL +/– button of the remote are
operable.
• If you do not want to limit the maximum volume
level, select "MAX."
52
US
Turning off the receiver
with the TV
(System Power Off)
When you turn the TV off by using the
POWER button on the TV's remote, the
receiver and the connected components turn
off automatically.
You can also use the receiver's remote to turn
off the TV.
. <
m
TV
(Yellow)
Press TV (Yellow) and TV ?/1 at the
same time.
The TV, receiver and the components
connected via HDMI are turned off.
Notes
• Set the TV Standby Synchro to "ON" before using
the System Power Off function. For details, refer to
the operating instructions supplied with the TV.
• Depending on the status, the connected
components may not be turned off. For details,
refer to the operating instructions supplied with the
connected components.
TV ?/1
< >
H M
X x