Serial Ata (Sata) / Serial Ataii (Sataii) Hard Disks; Installation - ASROCK P45R2000-WiFi User Manual

2 . 1 4 2 . 1 4 2 . 1 4 Serial A 2 . 1 4 2 . 1 4 Serial A Serial AT T T T T A (SA Serial A Serial A A (SAT T T T T A) / Serial A A (SA A (SA A (SA

Installation

Installation Installation
Installation Installation
P45R2000-WiFi / P45R2000 adopts Intel
Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID
10, RAID 5, and Intel Matrix Storage) functions. P45TurboTwins2000 adopts Intel
ICH10 south bridge chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII)
hard disks. You may install SATA / SATAII hard disks on this motherboard for internal
storage devices. This section will guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0, RAID 1, RAID 10 or Intel Matrix Storage
function, you need to install at least 2 SATA / SATAII hard disks. If you
plan to use RAID 5 function, you need to install at least 3 SATA / SATAII
hard disks.
2. It is not recommended to switch the "Configure SATAII as" setting after
OS installation.
A) / Serial AT T T T T AII (SA A) / Serial A A) / Serial A A) / Serial A AII (SAT T T T T AII) Hard Disks AII (SA AII (SA AII (SA
®
ICH10R south bridge chipset that supports
4 1 4 1 4 1
4 1 4 1
AII) Hard Disks AII) Hard Disks AII) Hard Disks AII) Hard Disks
®