Table of Contents
Advertisement
CAUTION!
1.
Some CPU you adopt may be overclocked to FSB2000 MHz, in this
situation, please adopt DDR3 1333 memory modules on this
motherboard. This motherboard supports native FSB1600/1333/1066/
800 MHz. For normal operation, you do no need to adjust the jumper
settings. For special overclocking mode, please refer to page 29 for
proper jumper settings.
2.
About the setting of "Hyper Threading Technology", please check page
58.
3.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 53 for details.
4.
This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 20 for proper
installation.
5.
Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency
1600
1333
1066
800
6.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows
®
Vista
TM
. For Windows
64-bit with 64-bit CPU, there is no such limitation.
7.
This motherboard supports ATI
use CrossFire
TM
function, please follow the instructions on page 25 to
reverse the direction of ASRock SLI/XFire Switch Card in advance.
8.
For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-
channel, 6-channel, and 8-channel modes. Please check the table on
page 13 and 14 for proper connection.
9.
Before installing SATAII hard disk to SATAII connector, please read the
"SATAII Hard Disk Setup Guide" on page 40 to adjust your SATAII hard
disk drive to SATAII mode. You can also connect SATA hard disk to SATAII
connector directly.
10. This motherboard supports eSATAII interface, the external SATAII
specification. Please read "eSATAII Interface Introduction" on page 37
for details about eSATAII and eSATAII installation procedures.
11. Power Management for USB 2.0 works fine under Microsoft
TM
TM
Vista
64-bit / Vista
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
Memory Support Frequency
DDR2 800, DDR2 1066,
DDR3 1066, DDR3 1333
DDR2 667, DDR2 800, DDR2 1066,
DDR3 1066, DDR3 1333
DDR2 667, DDR2 800, DDR2 1066,
DDR3 1066
DDR2 667, DDR2 800
®
XP 64-bit and Windows
TM
CrossFire
TM
technology. If you want to
9 9 9 9 9
®
XP
®
Vista
TM
®
®
Windows
Advertisement
Table of Contents
