Table of Contents
Advertisement
Installing the Printer Driver
2.1.2
Using USB Interface
You can print to the printer's USB connector if Windows 98/Me or Windows
2000 is running on your computer. You need to connect the printer to your
computer using a USB cable and install the USB Printing Support onto the
computer which is supplied by the Kyocera Mita Digital Library CD-ROM.
Installing the USB Printing Support
This section explains you how to install the USB Printing Support as well
as the printer driver onto your Windows 98 computer. If you are using
Windows Me or 2000, you can use the similar procedure. Follow the
instructions displayed on the screen.
1
Turn on the computer and the printer, then insert the Kyocera Mita
Digital Library CD-ROM into the computer's CD-ROM drive.
2
Connect the printer and the computer using a USB cable.
3
The Windows Plug and Play function will detect the printer
automatically and the Add New Hardware Wizard will open.
Click the Next button.
2-9
Advertisement
Table of Contents
