Adjusting The Volume - Hitachi CX-V3 Instruction Manual

ADJUSTING THE VOLUME

Changing the volume
You can adjust the volume on the unit or with the remote control.
Press VOLUME +/– until the desired volume is reached.
Adjusting Tone
Bass and Treble may be used to obtain a "flat" frequency response or a tone which suits
your individual listening preference. BASS adjusts low frequencies from -6 to +6. TREBLE
adjusts high frequencies from -6 to +6.
1. Press TREBLE or BASS on the system to select Bass or Treble mode.
2. Press +/– to adjust the level.
Note:
On the remote, you may also press BASS +/– or TREBLE +/– to adjust Bass or Treble.
Changing Sound Quality with EQ
During play, press EQ button repeatedly to select the preferred equalizer mode.
Note:
There are 4 preset EQ levels : Flat, Rock, Pop, Classic.
Muting Sound
1. Press MUTE button from remote unit to silence audio output. "MUTE" appears on
the display.
2. Press MUTE button again to cancel.
Using Sleep Feature
This feature shuts off the system and goes to Standby mode when selected sleep time
has passed.
• Press SLEEP button of remote control repeatedly to select the desired sleeping
time: 15, 30, 45 or 60 minutes. "SLEEP" flashes on the display as the time is selected.
Once the sleep time is selected, "SLEEP" appears on the display.
Using headphones (not supplied)
Plug your headphones into the headphones socket at the front of the unit.
Sound will switch from the speakers to the headphones. Never have the sound turned
up high when you have the headphones plugged in.
Warning : Listening to music at loud volumes can damage your hearing.
CX V3 English
15
English
15
14/3/06, 9:48