15. Lock the two rear locking casters on the lift by pressing down on the locking pedal
with your foot. Refer to FIGURE 2.1.
16. Lock the bathing unit door. Refer to the bathing unit's owner's manual.
Raising/Lowering the Bath Lift
NOTE: For this procedure, refer to
FIGURE 2.3.
To raise the bath lift, press the up arrow
button on the hand pendant.
To lower the bath lift, press the down
arrow button on the hand pendant.
Using the Scale (Model 1900S ONLY)
NOTE: For this procedure, refer to FIGURE 2.4.
1. With the seat empty and arms lowered, turn on the scale by touching the "on" button
on the face of the scale.
2. Press the "ZERO" button on the face of the scale.
NOTE: The digital readout shows 0.0.
3. Using the "UNITS" button, select either kilograms or pounds.
4. Transfer the resident on the seat of the lift and lower the arms.
5. Raise the resident.
NOTE: It is only necessary to raise the resident
until his/her feet are off the floor and not
touching the legs of the lift.
6. Press the "LOCK" key
7. Read and record the weight of the resident
on the readout of the scale.
Emergency Stop
NOTE: For this procedure, refer to
FIGURE 2.5.
• Press the RED emergency stop button
on the control box to stop the lift seat
and resident from raising or lowering.
• To disengage, rotate the RED
emergency stop button CLOCKWISE
until it pops out.
Part No. 1148113
SECTION 2—OPERATING THE BATH LIFT
FIGURE 2.3 Raising/Lowering the Bath Lift
FIGURE 2.4 Using the Scale (Model 1900S
RED Emergency Stop Button
Control Box
Press to Stop
Rotate CLOCKWISE to
Lift Seat
Disengage Emergency Stop
FIGURE 2.5 Emergency Stop
11
ONLY)
1900/1900S Bath Lift