Set Up; Plug In Power Cord - Invacare IRC5PO2V User Manual

SECTION 5—OPERATING INSTRUCTIONS

Set Up

Plug in Power Cord

Plug in power cord to an electrical outlet.
Connect Humidifier (If So Prescribed)
DO NOT overfill humidifier.
DO NOT reverse the oxygen input and output connections.
Water from the humidifier bottle will travel through the
cannula back to the patient.
NOTE: For this procedure, refer to FIGURE 5.1, FIGURE 5.2 on
page 17, FIGURE 5.3 on page 18.
1. Remove cap from bottle.
2. Fill humidifier with distilled water to the level indicated
by the manufacturer. Replace the humidifier cap and
securely tighten.
3. Insert a flathead screwdriver in the plate groove on the top
edge of the filter access door and gently pry the filter
access door off (FIGURE 5.2).
4. Pull up and remove the humidifier bottle adapter
(FIGURE 5.2).
Perfecto Series
™
2
WARNING
Humidifier
Bottle with Cap
FIGURE 5.1 Filling the Humidifier
16
Humidifier
Bottle w/o Cap
Part No 1143482