Table of Contents
Advertisement
Message in time
Display
data display
condition
Disc Damage
on, limit, off
Non AV Full
on, limit, off
b)
Index File!
on, limit, off
b)
File System
on, limit, off
b)
File System
on, limit, off
a) With respect to setting of basic menu item 016
b) This appears from firmware version 1.4.
During reception of commands from an external device connected to the S400 (i.LINK) connector
1) When extended menu item 215 has been set to "AV/C," and the remote
control switch has been set to "REMOTE."
Message in time
Display
data display
condition
MAX# SB CLP
on, limit, off
CL OVER DUR
on, limit, off
Non AV Full
on, limit, off
No Disc!
on
No Clip!
on, limit
Disc Top!
on
Disc End!
on
a) With respect to setting of basic menu item 016
98
8-3 Alarms
Description
a)
An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free sparing area.
An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free Non-Real-Time
space.
An attempt was made to record to a disc
containing an unsupported index file.
An attempt was made to record to a disc
with an unsupported file system
An attempt was made to record to a disc
when its file system was set to inhibit
recording.
Description
a)
A command was received to add a sub
clip when the number of registered sub
clips had already reached the upper limit
(300) of the specifications of this unit.
A command was received to add a sub
clip when the total duration of sub clips in
the clip list had already reached the
upper limit (24 hours) of the
specifications of this unit.
A command was received to record,
display an E-E picture, record an
essence mark, or add a quick scene
selection sub clip when there was no free
Non-Real-Time space.
A recording, playback, search, or other
command was received with no disc
loaded.
A playback or search command was
received for a disc containing no
recorded clips.
A PREV or reverse high-speed search
command was received with the disc
stopped at the top.
A NEXT or forward high-speed search
command was received with the disc
stopped at the end.
Action
This disc cannot be recorded. Exchange
the disc.
Insert a different disc with enough free
capacity.
Exchange the disc for one that contains
an index file supported by this unit.
Alternatively, format the disc (see page
31).
It may be possible to play back the disc,
but recording is not possible. Exchange
the disc for one formatted in a file system
supported by this unit. Alternatively,
format the disc (see page 31).
Action
These operations are not possible.
Insert a different disc with enough free
capacity.
Try the operation again after loading a
disc.
These operations are not possible.
1)
Advertisement
Table of Contents
