Volvo C30 2012 Owner's Manual page 121

Locks and support pins.
3. Locate the front section of the two support
pins behind the active locks (A) on both
sides.
4. Align one of the rear locks at (B) and extend
the lock plunger by moving the lock button
forwards.
5. Align the other rear lock in the same way
and extend the lock plunger by moving the
lock button forwards.
6. Extend the front lock plungers, one at a
time so that they lock in their active locks
(A).
The cargo cover hatch can be raised during
loading.
NOTE
The cargo cover has no load-securing func-
tion. Never load anything on top of the cargo
cover. For securing loads, see page 187.
Removing the cargo cover
1. Retract the front lock plungers at (A) to their
end positions by pulling back the lock but-
tons on both sides.
2. Retract the rear lock plungers at (B) to their
end positions by pulling back the lock but-
tons on both sides.
3. Lift up and turn the cargo cover before lift-
ing it from the cargo area.
04 Interior
Cargo area
Raising the floor hatch
Without cargo cover
Raise the floor hatch and secure it in the lugs
on both sides.
With hard cargo cover
Raise the hatch on the cargo cover. Then raise
the floor hatch and hook it into the hook
located under the cargo cover.
04
119