Volvo C30 2012 Owner's Manual page 107

An overload protection is deployed if one of the
seats is blocked. If this happens, turn off the
ignition and wait a short time before adjusting
the seat again. Only one of the seat's settings
can be adjusted at a time.
Memory function
Buttons for memory function.
Store setting
1. Adjust seat.
2. Press and hold button M while pressing
button 1, 2 or 3 simultaneously.
2 Only if the car is equipped with power seat with memory.
3 This setting does not affect settings that have been stored in the power seat's memory function.
Using a stored setting
Press one of the memory buttons 1–3 until the
seat stops. If you release the button then the
movement of the seat will stop.
Emergency stop
If the seat accidentally begins to move, press
one of the setting buttons for the seat or mem-
ory buttons in order to stop the seat.
WARNING
Risk of crushing. Make sure that children do
not play with the controls.
Check that there are no objects in front of,
behind or under the seat during adjustment.
Ensure that none of the rear seat passen-
gers is in danger of becoming trapped.
Memory in remote control key
All remote control keys can be used by differ-
ent drivers to store the settings for the driver's
2
seat . Proceed as follows:
•
Adjust the seat as you want it.
•
Lock the car by pressing the lock button on
the remote control key that you normally
use. This stores the positions of the seat in
the remote control key's memory
•
Unlock the car (by pressing the unlock but-
ton on the same remote control key) and
open the driver's door. The driver's seat
will automatically adopt the position that is
stored in the remote control key's memory
(if the seat has been moved since you
locked the car).
Entry to the rear seat
Handle for lowering the backrest
Button for moving the power seat longitu-
dinally
3
.
04 Interior
Front seats
04
105