Adjustments
Adjustments after parts replacement
Fan voltage adjustment
Auto calibration adjustment [PC]
Auto calibration adjustment [Component]
Color index adjustment-1
Color index adjustment-2
Service adjustment menu operation
To enter the service mode
To enter the "Service Mode", press and hold the MENU and SE-
LECT button for more than 3 seconds, or press and hold the
MENU button on the remote control for more than 20 seconds.
The service menu appears on the screen as follows.
To adjust service data
Select the adjustment group no. by pressing the
SELECT button
(increase) or
ment item no. by pressing the pointer e or d
the data value by pressing the 7 or 8
vice Adjustment Data Table" for further description of adjustment
group no., item no. and data value.
To exit the service mode
To exit the service mode, press the
Optical Unit
●
MENU button
(decrease), and select the adjust-
button
, and change
button
. Refer to the "Ser-
button.
: Adjustment necessary
●
Disassembly / Replaced parts
Color Wheel
●
Service Mode
Input
Group
0
Ver.
-27-
: Check necessary
❍
Power Board
Main Board
●
Computer 1
No.
Data
0
+0
1.00
●
❍
❍
●
Group no.
Item no.
Data value
Firmware
version no.