Control- Features
48
When the control is first powered on, it defaults to "LOAD SENSING"
LOAD SENSING
fill. (No "LOAD" size LED lights are lit at this time) The customer can
change any of the TEMP, OPTIONS, or CYCLES selection and load
sensing remains active. If the customer selects a specific LOAD size
manually, LOAD SENSING is deactivated and the pressure sensor fills
accordingly. If the customer leaves load sensing active and presses
the START pad, the machine calculates the load while all of the load
size lights alternate turning on. Once calculated the appropriate load
size LED will be displayed. (The Pulsator rotates in both directions
approximately 3 times to calculate load weight.)
18
Copyright 2009