Control- Features
Maximizes detergent efficiency by adding water in steps and slowly diluting
ULTRA
the detergent to the standard level.
CLEAN
The machine partially fills, (appx 75%) then begins to agitate for approximately 30
seconds. Pauses and continues fill for about 10 seconds, then agitates. It repeats
this process, in varying degrees and stages, 4 times before the tub is at the correct
water level and the machine completes the wash cycle. Display alternates between
UC and time remaining. (It is the only cycle with a pre-programmed 2
TEMP
Warm setting will highlight both COLD and HOT indicator lights
HEAVY
Adds 5 minutes to selected wash cycle.
DUTY
nd
rinse)
Copyright 2009
16