Invacare Storm Series Parts Catalog page 45

NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Item
Number Note
Part Number
1 See Chart
1 See Chart
2 See Chart
2 See Chart
3 See Chart
3 See Chart
4 A 1125723
5 1125724
NOTE: A - Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a new Back Pan
or Back Assembly is requested.
Overall
Back Height
16"
17"
18"
19"
20"
21"
22"
23"
24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
Form No. 03-034
Metal Curved Back Assembly
Description
#1 Back Pan w/ Vinyl Edge Trim 16"-18" Wide
#1 Back Pan w/ Vinyl Edge Trim 19"-22" Wide
#2 Back Cushion Assembly 16"-18" Wide
#2 Back Cushion Assembly 19"-22" Wide
#3 Back Assembly with Hardware 16"-18" Wide
#3 Back Assembly with Hardware 19"-22" Wide
Kit, Hook Fastener w/ Adhesive Back
Trim, Edge, Cut-To-Length, Vinyl Black (96" L)
#1 Back Pan w/ Vinyl Edge Trim - 16"-18" Wide
Material
Back Height
11"
12"
13"
14"
15"
16"
17"
18"
19"
To order call toll free 1-800-333-6900, or www.invacare.com
16" Wide 17" Wide
1157826 1157837
1157827 1157838
1157828 1157839
1157829 1157840
1157830 1157841
1157831 1157842
1157832 1157843
1157833 1157844
1157834 1157845
44
Quantity Per
Package Assembly
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
18" Wide
1157848
1157849
1157850
1157851
1157852
1157853
1157854
1157855
1157856