At The End Of A Programme; Switching Off; Unloading The Dishwasher - Miele Dishwasher Operating Instructions Manual

Operation

At the end of a programme

^ Open the door slightly to check that
the programme has finished.
The indicator light next to the
programme selected goes out when the
programme has finished.
If the programme indicator light is
still on, the programme has not yet
finished. Close the door again to
allow the programme to finish.
You can then empty the dishwasher.
,
To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is advisable
to leave the door closed until you are
ready to unload the crockery.
Alternatively you can open the door
fully until the crockery is cool
enough to unload. Do not leave the
door only partially open.
32

Switching off

At the end of a programme:
^ Open the door.
^ Switch the dishwasher off using the
Off button o.
The dishwasher will continue to use
electricity until it is switched off with
the Off button o.
If the dishwasher is not going to be
used for a longer period of time, e. g.
whilst on holiday, the stopcock should
be turned off.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
First unload the lower basket, then the
upper basket and cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.