Power Saving Setting - Fujitsu fi-6140 Operator's Manual

8.1 Scanner Settings
Settings
Using the Software Operation Panel, you can configure the following settings for the scanner connected to the PC.
[Device setting]
Item
Page counter
(Consumables
counter)

Power saving setting

Offset setting
Scan scale
Device settings 2
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/08/c08_01_01.htm (2/5) [2008/10/30 12:42:39]
Explanation
For evaluating the
consumable replacement
cycle.
Use this function to reset
the counters after replacing
consumables.
Select the waiting time
before entering the Power
saving mode.
Adjust the start position for
the document scanning.
Adjust the magnification in
the feeding direction.
Selectable parameter
Pick roller/Brake roller/remaining ink
level (only for the imprinter option)
Setting range 15 to 55 minutes (set in
steps of 5 min.)
Up down/Left right: setting range -2
to 2 mm (set in 0.5 mm steps)
Setting range -3.1% to 3.1% (set in
0.1% steps)
Default
—
15 min.
Up down/
left right : 0
mm
0%