Engine
Cutout
Figure 55 -
Insert Blowers through
Engine Cutout
KT504
install blower
11/08
15. Plug the AC box plug to the junction box.
16. To test blower operation. Turn the fireplace on.
Turn blower on. The blower should turn on within
five (5) minutes. Refer to the operating instruc-
tions on Signature Command remote control for
complete operation instructions.
Finishing
Re-install the lower access panel.
NOTE: Some older units are not equipped with
mounting brackets. Velcro and magnets are used
to mount blowers to sidewall and floor.
74D0009
KT504
AC Box
Connector Hole
Figure 57 - Connect AC Box to Control Box
OPTIONAL FAN BLOWER SYSTEM
Figure 56 -
Blower Installation Position
KT505
KT505
Screw
install blower
Control Box
FP1916
AC box
8/08
Start Position
Installed
Position
Connector Pin
Guiding Block
39