The Installation Guide Of Front Usb 3.0 Panel; The Installation Guide Of Rear Usb 3.0 Bracket - ASROCK H67M-GE/THW Owner's Manual

The Installation Guide of Front USB 3.0 Panel

Step 1
Prepare the bundled Front USB 3.0 Panel, four
HDD screws, and six chassis screws.
Step 3
Intall the Front USB 3.0 Panel into the 2.5"
drive bay of the chassis.
Step 5
Plug the Front USB 3.0 cable into the USB 3.0
header (USB_12_13) on the motherboard.

The Installation Guide of Rear USB 3.0 Bracket

Step 1
Unscrew the two screws from the Front USB 3.0
Panel.
Step 3
Screw the two screws into the rear USB 3.0
bracket.
ASRock H67M-GE/THW Motherboard
Screw the 2.5" HDD/SSD to the Front
Step 2
USB 3.0 Panel with four HDD screws.
Screw the Front USB 3.0 Panel to the
Step 4
drive bay with six chassis screws.
Step 6
The Front USB 3.0 Panel is ready to use.
Step 2
Put the USB 3.0 cable and the rear USB 3.0
bracket together.
Step 4
Put the rear USB 3.0 bracket into the
chassis.
27