Installing A Dimm - ASROCK H67M-GE/THW Owner's Manual

Hide thumbs Also See for H67M-GE/THW:
Table of Contents

Advertisement

Installing a DIMM

Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
Step 1.
Unlock a DIMM slot by pressing the retaining clips outward.
Step 2.
Align a DIMM on the slot such that the notch on the DIMM matches the
break on the slot.
The DIMM only ts in one correct orientation. It will cause permanent
damage to the motherboard and the DIMM if you force the DIMM into the slot
at incorrect orientation.
Step 3.
Firmly insert the DIMM into the slot until the retaining clips at both ends
fully snap back in place and the DIMM is properly seated.
16
notch
ASRock H67M-GE/THW Motherboard
notch
break
break

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents