Usb 3.0 Header; Infrared Module Header; Consumer Infrared Module Header; Print Port Header - ASROCK H67M-GE/THW Owner's Manual

(9-pin USB8_9)
(see p.2 No. 21)
(9-pin USB10_11)
(see p.2 No. 22)

USB 3.0 Header

IntA_P2_D+
IntA_P2_D-
(19-pin USB_12_13)
(see p.2 No. 19)
1
IntA_P1_D+
ID

Infrared Module Header

(5-pin IR1)
(see p.2 No. 25)

Consumer Infrared Module Header

(4-pin CIR1)
(see p.2 No. 24)

Print Port Header

AFD#
ERROR#
PINIT#
(25-pin LPT1)
(see p.2 No. 26)
1
SPD1
SPD0
STB#
ASRock H67M-GE/THW Motherboard
USB_PWR
P-9
P+9
GND
DUMMY
1
GND
P+8
P-8
USB_PWR
USB_PWR
P-11
P+11
GND
DUMMY
1
GND
P+10
P-10
USB_PWR
Besides two default USB 3.0
ports on the I/O panel, there is
GND
IntA_P2_SSTX+
IntA_P2_SSTX-
one USB 3.0 header on this
GND
IntA_P2_SSRX+
motherboard. This USB 3.0
IntA_P2_SSRX-
Vbus
header can support two USB
3.0 ports.
Vbus
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
IntA_P1_D-
This header supports an
IRTX
+5VSB
optional wireless transmitting
DUMMY
and receiving infrared module.
1
GND
IRRX
This header can be used to
connect the remote
1
GND
controller receiver.
IRTX
IRRX
ATX+5VSB
This is an interface for print
port cable that allows
GND
SLIN#
convenient connection of printer
SPD7
devices.
SPD6 ACK#
SPD5
BUSY
SPD4 PE
SPD3 SLCT
SPD2
23