Yamaha MCR-E810 Service Manual page 30

DVD-E810
DVD unit can turn on the power by also other key, "PLAY" or "OPEN/CLOSE (EJECT)".
In this case, it carries out a peculiar function to the key after processing power on. However, only the power on
processing is done by "PLAY" key without media.
When the system is in power on state and DVD unit is in standby state, only DVD unit is changed into power
on state by this operation.
DVD "PLAY" key
operation
3.2 Timer function
The unit setted in this RX timer function is playbacked at the setting time as the ON-TIME.
It functions even when at setted time the system is already in power on state or the unit is already playbacked.
(1) Timer play
The state is not changed if the setted unit is already in the state of playback.
RX unit
[Standby state]
Power supply through AC OUTLET
POWER_ON command [DVD state is
neither PORT_PLAY nor PORT_STOP]
PLAY command [DVD state isn' t
PORT_PLAY]
After sending POWER_ON command, if DVD unit has Auto-play function after power-on, RX will not send
PLAY command.
30
RX unit
[Power on state]
DVD unit
Wait "ON" setting
[Power shut down]
time
Power on process
PORT_PRE_STANDBY
PORT_STANDBY
Switch input function to unit
setted in timer function
PORT_STOP
PORT_PLAY
DVD unit
[Standby state]
PORT_PLAY
[Standby state] [Power on] [Play state]
Reset start
initialize process
Initialize complete
Power on process
Play process
Power on process
Play process