Yamaha MCR-E810 Service Manual page 28

DVD-E810
2. Command and Operation Key Code
The system command and the system remote control code described as follows are transmitted through RX command
bus.
2.1 RX request command
Name
POWER_ON
POWER_OFF
PLAY
STOP
DIMMER_ON
DIMMER_OFF
VFD_OFF
RX request command is not transmitted if DVD is already in the state that RX requests.
2.2 Operation key code
The DVD unit receives the remote control signal directly.
28
Code Function
7C-F6 Power on request
7C-F7 Standby request
7C-82 Playback request
7C-85 playback stop request
78-FE Display dimmer(decrement of brightness) request
78-FF Cancel display dimmer
78-FD VFD turn off request