Installing Dvc Media 5.0 Program - Samsung SCD24 Owner's Instruction Book

ENGLISH
USB interface

Installing DVC Media 5.0 Program

Do not connect the camcorder to PC before installing the program.
If another camera or scanner is connected, please disconnect it in advance.
This explanation is based on Windows
Program installation
1. Insert the software CD into CD-ROM drive.
- Installation selection screen appears in the monitor.
2. If the installation selection screen does not appear after inserting the CD
click "Run" on the Windows "Start" menu and execute SETUP.EXE file to begin installation.
- When CD-ROM drive is set to "D:drive", type "D:\setup.exe" and press Enter.
3. Click one of the icons listed below to install the selected software. (The program
automatically check and install the driver which the PC is needed)
DVC Driver: USB removable Disk Driver (Windows
USB PC CAMERA Driver
Editing Software
Using the "removable Disk" function
You can easily transfer data from a memory stick to a PC without additional add-on cards via a USB connection.
1. Set the mode switch to memory, set the power switch to CAMERA or PLAYER.
2. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB connector
on your computer.
Using the "PC camera" function
You can use this camcorder as a PC CAMERA.
When you connect to a Web site that can provide video chatting functions, you can use your camcorder
for such functions.
Using the camcorder with PC installed Net-meeting program, you can conduct video conference.
The screen size of PC CAMERA is 160
If PC is connected with the USB to the camcorder, the buttons which excepts the POWER SWITCH, MODE SWITCH,
ZOOM SWITCH, and NITE PIX SWITCH are not operated.
1. Set the mode switch to Tape, set the power switch to CAMERA.
2. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB connector on your
computer.
78 78
® 98SE OS.
® 98SE only)
120 Pixel.
1.