Miele Novotronic T 560 C Operating Instructions Manual page 22

Electrical connection
Electrical connection AUS
This tumble dryer is supplied ready for
connection to an a.c. single phase 240 V,
50 Hz supply. The rated load is 2.4 kW.
The machine is supplied with a 2 m long
mains cable with moulded plug and the
fuse rating is 10 A.
The appliance should be connected up
only by a qualified electrician, in ac-
cordance with national and local safety
regulations.
22
Important
The wires in the mains lead are coloured
in accordance with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol z or
coloured green or green and yellow.
The wire which is coloured blue must be
connected to the terminal which is marked
with the letter N or coloured black. The
wire which is coloured brown must be
connected to the terminal which is
marked with the letter A or coloured red.
WARNING
THIS APPLIANCE MUST BE EARTHED.