Zanussi Electrolux ZDF 501 User Manual page 5

Function
buttons
Programme selection
buttons
IMPORTANT!
It is possible to select a washing programme and the delay start also with the door slightly
opened. In this case the start of the programme or the countdown will occur after the closure of
the door. Until that moment it is possible to modify the set made.
In addition to the dishwashing programme selection, the following functions
can also be set with the help of these
buttons.
- the setting of the water softener,
- the cancelling of a programme in
progress.
Starting the washing programme:
1. Press the On/Off button.
2. Press the button corresponding to the required programme, the
corresponding light remains illuminated while the other programme
lights turn off. In the digital display will appear, flashing, the running
time of the programme (in minutes).
3. The programme in progress light illuminates.
4. After about 3 seconds from the last pressure of a button the
programme starts automatically. In the digital display the running time
of the programme is no longer flashing and the programme in
progress light remains illuminated.
IMPORTANT!
Once the programme has started, if you want to change the selection made
you must cancel the washing programme in progress.
Cancel the washing programme in progress:
1. Press and hold simultaneously function buttons 2 and 3 until ALL
programme button lights will illuminate.
2. Release function buttons 2 and 3.
3. Switch off the machine by pressing the On/Off button or select a new
washing programme (check that there is detergent in the detergent
dispenser.
5