Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi Electrolux ZDS 231
Summary of Contents for Zanussi Electrolux ZDS 231
- Page 1 User manual Dishwasher ZDS 231...
-
Page 2: Table Of Contents
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. -
Page 3: Safety Information
Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnecessary mistakes and accidents, it is im- portant to ensure that all people using the appliance are thoroughly familiar with its opera- tion and safety features. -
Page 4: Control Panel
Installation • Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • All packaging must be removed before use. • Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person. - Page 5 Programme selector dial and On/Off switch Start/cancel button Delay start button Programme selector indicator light • when in this position, the machine is switched off (corresponding light off), • when the marker on the dial corresponds with a programme, the machine is switched on and a pro- gramme is selected (programme selector indicator light on) •...
-
Page 6: Washing Programmes
End of programme indicator light Salt refilling indicator light Rinse aid refilling light Washing programmes Programme Heavy soil Intensive 70° Normal soil Normal 65° Light soil 30 min. Normal soil 50° Indicator lights Illuminates when the washing programme has ended. Switch off the dishwasher by returning the programme selector dial to the Off position. -
Page 7: First Use
Programme Any. Rinse and Hold Partial load (to be completed later in the day). 1) Ideal for washing a partially loaded dishwasher. This is perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 2) Test programme for test institutes. - Page 8 Set the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a det- rimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is.
- Page 9 Setting the water softener manually (see table) Set switch to position 1 or Setting the water softener electronically (see table) The water softener is factory set at position 5. The dishwasher must be switched off . Press and hold the start/cancel button and turn the programme selector dial clockwise till the first pro- gramme.
-
Page 10: Use Of Dishwasher Salt
Use of dishwasher salt CAUTION! Use only special salt suitable for dishwashers. Unscrew the cap. Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. IMPORTANT! Top up the special salt when the light on the control panel illuminates. -
Page 11: Use Of Rinse Aid
Use of rinse aid Open the lid. CAUTION! Never fill the rinse aid dispenser with any other sub- stances (e.g. dishwasher cleaning agent, liquid deter- gent). This would damage the appliance. Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing. - Page 12 • Before loading the dishes, you should: – Remove all left over food and debris. – Soften remnants of burnt food in pans • When loading the dishes and cutlery, please note: – Dishes and cutlery must not impede the rotation of the spray arms.
-
Page 13: Upper Basket
Load cutlery. For best re- Place knives and other sults we recommend you items of cutlery with sharp to use the cutlery grid pro- points or edges with their vided (if the size and di- handles facing upwards. mensions of the cutlery Risk of injury! allow it) Load upper basket. -
Page 14: Use Of Detergent
Move the front runner Refit the basket in the stops (A) of the upper bas- higher position and re- ket outwards and slide the place the stops (A) in their basket out. original position. Use of detergent IMPORTANT! Only use detergents suitable for dishwashers. Open the lid. -
Page 15: Unloading The Dishwasher
For programmes with pre- When using detergent wash add an additional tablets: place detergent detergent dose in com- tablets in compartment A. partmentB. Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appli- ance. -
Page 16: Cleaning The Spray Arms
Clean filters A, B and C thoroughly under running water. Replace the filters and lock by turning the handle clockwise to the stop. Cleaning the spray arms NEVER try to remove the spray arms. If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. -
Page 17: Environmental Concerns
2. Leave the door ajar to prevent the forma- tion of any unpleasant smells. 3. Leave the inside of the machine clean. Frost precautions Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the ap- pliance door, disconnect the water inlet pipe and empty it. -
Page 18: Something Not Working
Something not working The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Fault code and malfunction •... - Page 19 Once these checks have been carried out; close the dishwasher’s door and switch on the appliance. Press the button of the programme that was running before the intervention of the alarm. The programme will continue from the point at which it was interrupted. If the malfunction or fault code reappears con- tact the Service Force Centre.
-
Page 20: Technical Data
Technical data Dimensions Electrical connection Voltage - Overall power - Fuse Water supply pressure Capacity Max. weight Consumption values The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the var- Programme Programme duration (in A Intensive 70°... -
Page 21: Installation
rinse aid respectively and using the test pro- gramme (see "Consumption values"). Amount of detergent required Rinse aid setting Upper basket without smaller bowl and salad-bowl cup racks: position A Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person. -
Page 22: Inlet Hose
WARNING! Only use, for connection to the water mains, new hose-set; old hose-set must not be reused. CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, Inlet hose Connect the inlet hose to a water tap with an external thread of 3/4”. -
Page 23: Electrical Connection
If you use a drain hose extension the total length should not be longer than 4 metres. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. -
Page 24: Guarantee/Customer Service
Levelling Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on either side of the cabinet. Guarantee/Customer Service GREAT BRITAIN & IRELAND Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of the purchase this Elec- trolux appliance or any part thereof is proved to be defective by reason only of faulty workman-... -
Page 25: European Guarantee
Tel: Electrolux 08705 950 950 (*) AEG-Electrolux 08705 350 350 (*) Zanussi-Electrolux 08705 727 727 (*) (*) Calls may be recorded for training purposes For Customer Service in The Republic of Ireland please contact us at the address be- low:... -
Page 26: Www.electrolux.com
Addington Way, Luton, Bedford- shire LU4 9QQ 4, Limnou Str., 54627 Thessaloniki Slavonska avenija 3, 10000 Zagreb Long Mile Road Dublin 12 C.so Lino Zanussi, 26 - 33080 Por- cia (PN) Kr. Barona iela 130/2, LV-1012, Riga Ozo 10a, LT-08200 Vilnius... - Page 27 Magyarország Nederland Norge Österreich Polska Portugal Romania Schweiz - Suisse - Svizzera Slovenija Slovensko Suomi Sverige Türkiye Россия +36 1 252 1773 +31 17 24 68 300 +47 81 5 30 222 +43 18 66 400 +48 22 43 47 300 +35 12 14 40 39 39 +40 21 451 20 30 +41 62 88 99 111...
- Page 28 117984510-00-08062007 Subject to change without notice...