Filling With Rinse Aid; Adjusting The Dosage Of Rinse Aid - Zanussi Electrolux ZDF 501 User Manual

Dishwasher
Hide thumbs Also See for ZDF 501:
Table of Contents

Advertisement

Filling with rinse aid

IMPORTANT!
Top up the rinse aid when the light on the
control panel illuminates.
CAUTION!
Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid
detergent). This would damage the appliance.

Adjusting the dosage of rinse aid

Increase the dose if there are drops of water or
lime spots on the dishes after washing.
12
Open the lid.
Open the lid.
Fill up with rinse aid.
The maximum level for
filling is indicated by
"max".
Reduce the dose if there are whitish streaks
on the dishes or a bluish film on glassware or
knife blades.
Set the dosage level.
(The dose is factory set
in position 4).
Clean up any rinse aid
which overflows. Close
the lid and press until it
locks.
Close the lid and press
until it locks.

Advertisement

Table of Contents
loading

Table of Contents