Fujitsu SPARC Enterprise M8000 Product Notes page 37

Specific Issues and Workarounds Concerning Solaris (Continued)
TABLE 6
CR ID Description
6534471 Domain may panic.
6535564 PCI hot plug to PCI slot #0, #1 or External I/O
Expansion Unit may fail on XSB added by DR.
6536564 showlogs(8) and showstatus(8) command
on XSCF might report wrong I/O component
due to wrong diagnosis by Solaris Fault
management Architecture when faults in I/O
devices occur.
6537511 Bluetooth partner is hung during security tests
execution
6539084 Sun PCIe Quad-port Gigabit Ethernet Adapter
UTP card(X4447A-Z) might panic during a
reboot.
6539909 Do not use the following I/O cards for network
access when you are using the boot net install
command to install the Solaris
OS:
• X4447A-Z/X4447A-Z, PCIe Quad-port
Gigabit Ethernet Adapter UTP
• X1027A-Z/X1027A-Z, PCIe Dual 10 Gigabit
Ethernet Fiber XFP
Workaround
Add the following line to /etc/system and
reboot the domain.
set heaplp_use_stlb=0
This bug has been fixed in 125100-06.
There is no workaround. Use DR instead of
PCI hot plug if need to add or remove PCI
card on the XSB.
To avoid this problem, issue the following
commands on the domain.
# cd /usr/platform/SUNW,SPARC-
Enterprise/lib/fm/topo/plugins
# mv ioboard.so ioboard.so.orig
# svcadm restart fmd
If the following messages are displayed on the
domain, contact a sales representative or a
certified service engineer.
Example:
SUNW-MSG-ID: SUNOS-8000-1L, TYPE:
Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Sun May 6 18:22:24 PDT 2007
PLATFORM: SUNW,SPARC-Enterprise, CSN:
BE80601007, HOSTNAME: sparc
This bug has been fixed in 125369-05.
Restart application server
There is no workaround. Check for the
availability of a patch for this defect.
This bug has been fixed in 125670-01.
When running Solaris 10 11/06, use an
alternate type of network card or onboard
network device to install the Solaris OS via the
network.
This defect does not exist in Solaris 10 8/07.
SPARC Enterprise M8000/M9000 Servers Product Notes 27