Fujitsu SPARC Enterprise M8000 Product Notes page 34

Specific Issues and Workarounds Concerning Solaris (Continued)
TABLE 6
CR ID Description
6502204 Unexpected error messages may be displayed
on console on booting after CPU UE panic.
Example:
SUNW-MSG-ID: FMD-8000-11, TYPE:
Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Tue Jan
2007
PLATFORM: SUNW,SPARC-Enterprise,
CSN: 2030636002, HOSTNAME: P2-DC1-
16-d0
6502750 Notification message for inserted or removed
card by PCI hot plug may not output.
6505921 Correctable error on the system PCIe bus
controller generates an invalid fault.
6508432 Many correctable errors (CE) may occur, and
despite these are the correctable errors,
domain may panic.
6508434 The domain may panic when an additional
PCI-X card is installed or a PCI-X card is
replaced by using PCI hot plug.
6509337 s10s_u3 wanboot fails - The server returned
416: Requested Range Not Satisfiable.
6510779 On a large single domain configuration, the
system may incorrectly report very high load
average at times.
6510861 When Dual-Channel Ultra320 SCSI Card
(SE0X7SC2F, SE0X7SC2X) is mounted,
correctable errors(CE) occur and system may
panic.
6511374 Unexpected error messages may be displayed
on console after changing the system
configuration.
Example:
WARNING: Translation error source
/LSB0/B0/0, PA 3c000000000, target
/LSB0/B0/20000000
24 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1041 • October 2007
Workaround
If you see unexpected messages, use the XSCF
command showdomainstatus(8) to check
system status on XSCF.
9 20:45:08 JST
None available at this time.
Create a file /etc/fm/fmd/fmd.conf
containing the following lines;
setprop client.buflim 40m
setprop client.memlim 40m
Set the following to /etc/system and then
reboot the domain:
set pcie:pcie_aer_ce_mask = 0x2001
Do not insert a different type of PCI-X card on
the same PCI slot card by using PCI hot plug.
None available at this time.
There is no workaround. Check for the
availability of a patch for this defect.
To mask these errors with Dual-Channel
Ultra320 SCSI Card (SE0X7SC2F, SE0X7SC2X),
add the following entry to the /etc/system file
and then reboot the system:
set pcie:pcie_aer_ce_mask = 0x31c1
This message can be safely ignored.