Pioneer DEH-945UB Owner's Manual page 12

Section
Operating this unit
02
# Genre display changes depending on the genre
of music.
# Genre display may not operate correctly depend-
ing on the application used to encode audio files.
Turning the clock display on or off
1 Press ENTER to display the main menu.
2 Turn LEVER to change the menu option
and press ENTER to select ENTERTAINMENT.
3 Turn LEVER to select the function.
4 Press ENTER to select the desired setting.
Clock display—elapsed time display—clock off
# You can switch the function by pressing CLK/
DISP OFF.
Selecting the illumination color
This unit is equipped with multiple-color illumi-
nation. You can select desired colors for the keys
and display of this unit. You also can customize
the colors you want to use.
Advanced operations using special
buttons
You can select desired colors for the keys of this
unit.
1 Press
.
2 Turn LEVER to select the desired setting.
Key—Display—Key & Display
3 Press ENTER to select.
For details about the settings, refer to Selecting
the key color from the illumination color list on
this page.
Selecting the key color from the
illumination color list
You can select desired colors for the keys of this
unit.
12
En
1 Press ENTER to display the main menu.
2 Turn LEVER to change the menu option
and press ENTER to select ILLUMI.
3 Turn LEVER to display Key and press
ENTER to select.
4 Turn LEVER to select the illumination
color.
You can select one option from the following list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! Three sets of colors (WARM, AMBIENT,
CALM)
! CUSTOM (customized illumination color)
Notes
! When SCAN is selected, the system auto-
matically cycles through the 27 preset col-
ors.
! When WARM is selected, the system auto-
matically cycles through the warm colors.
! When AMBIENT is selected, the system au-
tomatically cycles through the ambient col-
ors.
! When CALM is selected, the system auto-
matically cycles through the calm colors.
! When CUSTOM is selected, the customized
color saved is selected.
Selecting the display color from the
illumination color list
You can select the desired colors for the display
of this unit.
1 Press ENTER to display the main menu.
2 Turn LEVER to change the menu option
and press ENTER to select ILLUMI.
3 Turn LEVER to switch to Display and
press ENTER to select.
Operating this unit
4 Turn LEVER to select the illumination
color.
You can select one option from the following list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! Three sets of colors (WARM, AMBIENT,
CALM)
! CUSTOM (customized illumination color)
Note
For details about colors on the list, refer to Se-
lecting the key color from the illumination color
list on this page.
Selecting key and display color from
the illumination color list
You can select the desired colors for the keys
and display of this unit.
1 Press ENTER to display the main menu.
2 Turn LEVER to change the menu option
and press ENTER to select ILLUMI.
3 Turn LEVER to display Key & Display and
press ENTER to select.
4 Turn LEVER to select the illumination
color.
You can select one option from the following list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! Three sets of colors (WARM, AMBIENT,
CALM)
Notes
! You cannot select CUSTOM in this function.
! Once you select a color in this function, col-
ors on the keys and display of this unit auto-
matically switch to the color you selected.
! For details about colors on the list, refer to
Selecting the key color from the illumination
color list on this page.
Customizing the illumination color
1 Press ENTER to display the main menu.
2 Turn LEVER to change the menu option
and press ENTER to select ILLUMI.
3 Turn LEVER to display Key or Display.
Press ENTER to select.
4 Press ENTER and hold until the customiz-
ing illumination color setting appears in the
display.
5 Press ENTER to select the primary color.
R (red)—G (green)—B (blue)
6 Turn LEVER to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 20 for all three of
R (red), G (green), and B (blue) at the same time.
# You can also perform the same operation on
other colors.
Notes
! You cannot create a custom illumination
color when SCAN or a set of colors (WARM,
AMBIENT, or CALM) is selected.
! You can create custom illumination colors
for both Key and Display.
Switching the display indication and
button illumination
Display indication and button illumination can
be switched on or off.
% Press and hold CLK/DISP OFF.
Pressing and holding CLK/DISP OFF switches
the display indication and button illumination
on or off.
# Even if the display indication is turned off, opera-
tion can be conducted. If operation is conducted
while the display indication is off, display will light
up for a few seconds and then turn off again.