Adjusting Shading; Setting The Product To Be Checked By Phone - Samsung SF-430 User Manual

Adjusting Shading

If the scanning unit becomes dirty, it can alter the shading
value. If your print has black lines or is blurred, adjust the
shading setting. Take the following steps:
1
2
3
4
N
adjusting.
Setting the Product to be Checked
by Phone
The Remote Test feature allows your product to be checked
out by a service company at a remote place by phone.
1
2
3
4
6.20 M
AINTENANCE
Load a sheet of white Letter-size paper into the
document feeder.
Press Setup .
Press the Scroll buttons (
"8.MAINTENANCE" on the display and then press Enter .
Press the Scroll buttons (
"ADJUST SHADING" on the display and then press
Enter .
:
Do not remove paper from the document feeder while
OTE
Press Setup .
Press the Scroll buttons (
"8.MAINTENANCE" on the display and then press Enter .
Press the Scroll buttons (
"REMOTE TEST" on the display and then press Enter .
Press the Scroll buttons (
ON and then press Enter .
If you want to protect your product from being accessed
by unauthorised persons, select "OFF".
or ) until you see
or ) until you see
or ) until you see
or ) until you see
or ) to turn this feature