Setting the Handset Mode
You can activate the PIN code to restrict the use of the
handset by setting the handset mode to ON. This will block
the outgoing calls from your product by unauthorised
persons.
N
OTE
code by restricting colour copy. See page 1.43.
1
2
3
4
5
1.44
S
ETUP
:
Before enabling this feature, you must enable the PIN
Press Setup on the front panel. The display shows
"1.SYSTEM SETUP" on the bottom line.
Press Enter.
Press the Scroll buttons (
see "HANDSET MODE", and press Enter.
Press the Scroll buttons (
the desired setting.
If you want to restrict calls from your product, select
"ON". Otherwise, select "OFF".
Press Enter to save the selection.
You will be required to enter the four-digit code each
time you lift the handset.
or
) repeatedly until you
or
) repeatedly to select